新品上海荣计达R51扫描型钢筋保护层测定仪

一，产品简介：

R51+型扫描型钢筋保护层测定仪（又名钢筋仪，钢筋测定仪，钢筋扫描仪）用于检测现有钢筋混凝土或新建钢筋混凝土内部钢筋直径分布及钢筋的混凝土保层厚度。仪器采用高速平台，实时显示测量信息，实现双量程测试。功能强大的Wndows处理软件，将图形图像化直观显示，可生成多达6种检测报告。依据规范《混凝土中钢筋检测技术规程》JGJ/T152-2008

First, the product introduction:
The R51+ scanning type steel protective layer measuring instrument (also known as steel bar, steel bar measuring instrument, steel bar scanner) is used to detect the inner steel bar diameter distribution of existing reinforced concrete or new reinforced concrete and the concrete thickness of steel bar. The instrument uses a high-speed platform to display measurement information in real time for dual-range testing. The powerful Wndows processing software visualizes graphical images and generates up to six test reports. According to the specification "Technical Regulations for Reinforcement in Concrete" JGJ/T152-2008

二，技术参数：

★钢筋直径适应范围：φ6mm-φ50mm

★保护层厚度范围：量层：6mm-9mm;二量程：7mm-180mm

★保护层厚度允许误差：一量程：（±1； 6-59）（±2；60-69）（±4；70-90）

二量程：（±1；7-79）（±2；80-119）（±4；120-180）

★直径测量范围：φ6mm-φ50mm

★直径允许误差：±1档

★环境温度：-10℃-＋40℃

★相对湿度：<90%RH

★电磁干扰，无强交变电磁场，不得长时间阳光直射

★供电方式：6节5号碱性电池，供电时间大与30小时

Second, technical parameters:
★ Rebar diameter adaptation range: φ6mm-φ50mm
★ Protective layer thickness range: measuring layer: 6mm-9mm; second range: 7mm-180mm
★Property thickness tolerance: one range: (±1; 6-59) (±2; 60-69) (±4; 70-90)
Two ranges: (±1; 7-79) (±2; 80-119) (±4; 120-180)
★ Diameter measurement range: φ6mm-φ50mm
★ Diameter allowable error: ±1 file
★ Ambient temperature: -10 °C - +40 °C
★ Relative humidity: <90%RH
★Electromagnetic interference, no strong alternating electromagnetic field, no long-term direct sunlight
★Power supply mode: 6 section 5 alkaline batteries, power supply time is 30 hours

三，仪器特点：

★插接件寿命长。采用瑞士进口的雷默(lemo)牌插接件，仪器插座、信号线插头使用寿命长；

★信号线质量好。采用日本太阳诱电信号线，线柔软、结实，使用寿命长；

★仪器测量快速、准确。我公司钢筋仪测试速度快，能够对钢筋进行准确的定位，仪器测试的重复性和稳定性好，这是我公司钢筋仪的一个鲜明特点。

★测试探头使用寿命长。我公司钢筋仪探头底面采用高质量耐磨层，探头的寿命比同类产品的寿命提高了数倍。

★单探头测试。测试中无需更换探头，可进行双量程的切换，保证了测试精度和探测深度。

★实时显示测量信息。测试结果直接显示在屏幕上，无需人工参与，大大提高了测试精度。

★网格扫描模式和剖面扫描模式。可直观的显示钢筋的分布图。且扫描边界在扫描过程中自动切换，实现了无边界扫描。

★三轮式的扫描系统。可确保的扫描路径的正确，保证了测试数据的正确。

★功能强大的专业windows数据分析处理软件。以图形的方式表示测试结果，可以直接生成

Word检测报告或将数据导入Excel，方便快捷。

Third, the instrument features:
★The connector has a long life. Adopting the Lemo brand connector imported from Switzerland, the instrument socket and signal cable plug have a long service life;
★ Signal line quality is good. Adopting Japanese solar lure signal line, the line is soft, strong and has a long service life;
★ Instrument measurement is fast and accurate. Our company's steel bar test speed is fast, it can accurately position the steel bar, and the repeatability and stability of the instrument test is good. This is a distinctive feature of our company's steel bar instrument.
★ Test probe has a long service life. The bottom surface of our company's steel bar probe adopts high quality wear layer, and the life of the probe is several times higher than that of similar products.
★ Single probe test. There is no need to change the probe during the test, and the two-range switching can be performed to ensure the test accuracy and depth of detection.
★ Display measurement information in real time. Test results are displayed directly on the screen, eliminating the need for manual intervention, greatly improving test accuracy.
★ Grid scan mode and section scan mode. The distribution map of the steel bars can be visually displayed. And the scan boundary is automatically switched during the scanning process, enabling borderless scanning.
★ Three-wheel scanning system. The correct scan path is ensured and the test data is correct.
★ Powerful professional windows data analysis and processing software. Graphically represent test results, which can be generated directlyWord detects reports or imports data into Excel, which is quick and easy.